How to Maintain and Care for Your Modded Casioak

🧽 How to Maintain and Care for Your Modded Casioak

You’ve completed your Casioak mod — it looks amazing, fits your style perfectly, and turns heads everywhere you go. But to keep your upgraded watch looking sharp and running smoothly, proper care is essential.

In this guide, we’ll share essential Casioak care tips to help you protect your investment, extend the life of your components, and maintain the look and function of your modded watch.


🫧 1. Cleaning Your Casioak (Weekly)

Here’s a simple Casioak cleaning guide you can follow:

  • Use a soft microfiber cloth to wipe off sweat, oils, and dirt after daily use
  • For stainless steel bezels or bracelets, gently scrub with a soft toothbrush and mild soap diluted in warm water
  • Dry thoroughly, especially around spring bars and screw holes

A clean watch isn’t just about appearance — it also helps prevent corrosion, especially around the case back or strap ends.


🛡️ 2. Protecting the Metal Bezel from Scratches

Your Casioak’s new stainless steel bezel looks fantastic, but it can scratch like any metal. To keep it looking fresh:

  • Avoid knocking your watch against hard surfaces like desks or door frames
  • Store it in a watch case or soft pouch when not wearing it
  • Consider applying a light plastic film protector if you want maximum protection

Minor scratches? You can polish brushed stainless steel bezels lightly with a cape cod cloth or soft polishing pad — just follow the grain of the metal.


💧 3. Water Resistance Care

If you’ve done a Casioak mod involving the case back or bezel, your watch may no longer be fully waterproof. Even with standard swaps:

  • Keep your modded Casioak away from pools and showers
  • Wipe dry immediately if exposed to rain or moisture
  • Only swim with it if you're certain the seals were reinstalled properly

Water resistance isn’t guaranteed after a mod — so when in doubt, stay dry!


🧯 4. Strap Maintenance

Whether you chose a rubber strap, stainless steel bracelet, or leather band — each requires care:

  • Rubber straps: Rinse with water after sweating or swimming, dry fully
  • Steel bracelets: Clean regularly between links with a brush or toothpick
  • Leather bands: Avoid water exposure and condition occasionally with leather balm

📦 5. How to Store Your Modded Watch

Good storage is key to modded watch care. Here are best practices:

  • Use a padded watch box to prevent dust and scratches
  • Store away from direct sunlight and extreme temperatures
  • If rotating multiple watches, give your Casioak a wipe-down before putting it away

Bonus: keep silica gel packs in your box to absorb moisture!


🔧 6. When to Re-tighten Screws

With regular use, bezel screws or strap screws may loosen over time. Check them every 2–3 months and re-tighten with a screwdriver if needed.

Never over-tighten, as that can strip the threading.


🛒 Looking for Replacement Parts or Extra Straps?

If your strap wears out or you want to switch up your look, we’ve got everything you need to refresh your build.

👉 Shop extra Casioak straps, bezels, and accessories here


✅ Final Thoughts

With the right Casioak maintenance routine, your modded GA2100 will last for years and continue to look stunning on your wrist.

A little attention goes a long way — and your watch deserves it!

👉 Keep your Casioak in top shape — explore accessories and upgrade parts now

Retour au blog

Laisser un commentaire